Things I've built
Paste in a picture and this userscript says whether it will print crisply at CR80 size and 300 dpi.
Owner, PlasticCard.nz. Card finishes and print advice for designers.
Designers often leave the finish until last, but it changes how the artwork looks. Gloss reflects light and gives a bright, polished look. Matte is quieter, with less sheen. Clear, frosted, metallic-effect and embossed stock each push the look or the feel in another direction. I help designers pick a finish at PlasticCard.nz.
What changes with each finish
Clear, frosted and metallic surfaces can alter how colours and fine detail come out. Embossing and tipping need their own clear space in the layout. Names, photos, barcodes, stripes and signature panels still have to work on the finished card.
The same artwork can shift in appearance from one finish to another, and the International Color Consortium explains how colour management is meant to keep results consistent across surfaces.
Choosing in practice
Think about who uses the card and how often it gets handled. Then weigh the finish together with the material, printed sides and personalisation. I set this out step by step in how to choose a plastic card finish.
Ask early
If you're unsure, send the artwork and the finishes you're weighing up, and I can explain how it would look on each.
Matte works especially well on black and other dark cards, because it helps hide scratches and fingerprints. That makes it a practical pick for cards handled every day, like business or membership cards. The trade-off is a softer, lower-sheen look, so colours read less bright than they would under gloss. If a design leans on vivid colour, gloss may suit it better. Where you can, ask for samples and look at both in the light where the card will actually be used. A screen image can't show you how the surface catches light. I compare the finish options in more depth on our site.
Metallic-effect cards are still plastic. The gold, silver or other metallic look comes from the card material, the ink, a foil or another finishing method, and the method is confirmed for each job. Reflective areas make fine text and codes harder to read, so I keep names, numbers and barcodes on opaque or high-contrast panels. Plan the front and back together, so the shine and the practical areas don't compete. If you have a reference for the shade you want, send it over and I'll compare it with what is available. You don't need to know the printing method to ask.